Contents

• Field Test Methods
  • Field Aggregate and Soil Test Methods
    • Sand Replacement Tests
      • Q141B - Compacted Density of Soils and Crushed Rock (Sand Replacement)
    • Dynamic Cone Penetrometer Tests
      • Q114B: Insitu California Bearing Ratio - dynamic cone penetrometer
  • Field Asphalt Test Methods
  • Field Concrete Test Methods
    • AS 1012.4.2 Air Content of Freshly Mixed Concrete
    • AS 1012.8.4: Making and curing concrete - Drying shrinkage specimens prepared in the field or in the laboratory
  • Field Masonry Test Methods
  • Field Grout Test Methods
  • Other Field Test Methods
• Laboratory Test Methods
  • Lab Aggregate and Soil Test Methods
    • California Bearing Ratio Single Point Tests
      • Q113C Single-point - California Bearing Ratio of soil at nominated levels of dry density and moisture content
      • AS 1289.6.1.1 - Determination of the California Bearing Ratio of soil
    • Plasticity Index Tests
      • ASTM D4318: Liquid Limit, Plastic Limit, and Plasticity Index of Soils
    • California Bearing Ratio Multipoint Tests
      • Q113A Multipoint - California Bearing Ratio of soil - standard
      • Q113B Multipoint - California Bearing Ratio of soil - modified
    • Emerson Class Number
    • Maximum Dry Density/Proctor Tests
      • AS 1289.5.1.1: Determination of the density/moisture content relation of a soil - standard
      • AS 1289.5.2.1: Determination of the density/moisture content relation of a soil - modified
      • Q142A: Dry density–moisture relationship of soils and crushed rock - standard
      • Q142B: Dry density–moisture relationship of soils and crushed rock - modified
    • Moisture Content Tests
      • Q102A: Standard moisture content of soil - oven drying
      • Q102D: Subsidiary moisture content of soil – hotplate drying
      • Q102B: Subsidiary moisture content of soil - microwave oven drying
      • ASTM D2216: Water (Moisture) Content of Soil and Rock by Mass
      • BS 1377-2 Clause 3.2: Determination of moisture content (Oven-drying method)
    • Particle Size Distribution Tests
      • Q103A: Particle Size Distribution of Soil - Wet Sieving
    • Sand Equivalent Tests
      • NZS 4407 Test 3.6: Sand Equivalent
    • ASTM C127 - Specific Gravity and Absorption of Coarse Aggregate
  • Lab Concrete Test Methods
    • Reporting of Site Cured Specimens on US Concrete Test Reports
    • AS 1012.13 - Determination of the drying shrinkage of concrete
  • Lab Asphalt Test Methods
  • Lab Masonry Test Methods
  • Lab Grout Test Methods
  • Other Lab Test Methods
• Reduced Tests
  • Q109 Series: Apparent particle density of soil - weighted average, fine fraction, coarse fraction
  • Proctor Test

Products described on these pages, including but not limited to QESTLab®, QESTNet, QESTField, QEST Web App, Construction Hive, and associated products are Trademarks (™) of Spectra QEST Australia Pty Ltd and/or related companies.

The content of this page is confidential. Do not share, duplicate or distribute without permission.

© 2022 Spectra QEST® Australia Pty Ltd and/or related companies.  Terms of Use and Privacy Statement