Configuring Equipment Calibration User Documents/Dynamic Worksheets

Applies to QESTLab

Contents

Overview

User Document Type: Equipment Calibration is a special type of external document that can be mapped to a Dynamic Worksheet and allows values to be uploaded to the Calibration Values tab on an equipment screen.

Creating a User Document

For general instructions on creating a User Document, please refer to User Documents - Creating a User Document

For equipment calibration user documents, set the Document Type to Equipment Calibration.

Set the Parent Document to the appropriate equipment type.

Open

Creating the Dynamic Worksheet

Please refer to Dynamic Worksheets for instructions on creating and mapping dynamic worksheets. For equipment calibrations, the Dynamic Worksheets - QEST Platform XSD File needs to be exported from the equipment calibration user document created as described in the section above.

Associating the Dynamic Worksheet

Once the fields of interest have been mapped to the Excel template, the dynamic worksheet is associated to the equipment calibration user document created above. Please refer to the article Dynamic Worksheets - Associating Dynamic Worksheets for further details.

Using the Worksheet in QESTLab

Once the user document has been made available to users as detailed in User Documents - Granting Access to a User Document , the worksheet can be set for a calibration task on the equipment screen as described in Custom Equipment Calibration Worksheets - Dynamic Worksheet External Calibrations.