Project-Based Field Density Test Numbering

Applies to

Contents

Overview

The QEST Platform supports project-based numbering for most field density testing. When enabled, all density tests for the project are numbered sequentially. This functionality is available for the following tests:

• Nuclear Field Density [ASTM D6938]

• Nuclear Field Density - Metric [ASTM D6938]

• In-situ Density - Sand Cone Method [ASTM D 1556]

• Nuclear Field Density [AASHTO T 310]

• Asphalt Density by Nuclear Method [ASTM D2 950]

• Nuclear Field Density [ARIZ 235]

• Nuclear Field Density [BS 1377-9 Clause 2.5]

• Sand Replacement [BS 1377-9 Clause 2.2]

• In-situ Density of Bituminous Material by Nuclear Method [UK In-House Method]

• Nuclear Field Density [AS 1289.5.4.1]

Configuration and Details

The configuration of this feature is done through a script that can be provided by Spectra QEST. Once this is implemented, the following items will be available:

• Counters configured in QEST Admin Console for density testing.

• A new, read-only field for Test Number is shown in QESTField and QESTLab.

Once configured, all existing and new projects in the QEST Platform will begin incrementing this test number beginning with 1. This is a read-only field and it cannot be modified by users or administrators.

In QESTField, technicians will see the Test Number as read-only in the Field Density Test section of the field workflow:

Open

In QESTLab, this read-only field is visible within the test worksheet and also shown on the Field Density Test Report in the Test Results and Location sections.

Open